General introduction

T-Bright Dental sintering furnace, the electric lifting platform is used to accurately and quickly place the crucible in the furnace. 4 pcs MoSi2 is heated in a ring shape and the material is heated more evenly.

T bright dental zirconia sintering furnace
T Bright Dental Zirconia Sintering Furnace

Especially for zirconia dentures, the dentures that fired are more transparent and beautiful.

T bright Dental Zirconia Sintering Furnace Features

  • T-Bright is specially designed for the sintering of small batch samples of zirconia denture crystal, structural ceramics, and polymer ceramics.
  • Max temperature: 1700℃
  • Working temperature: 1600℃
  • Automatic program for heating, platform moving. It’s very convenient for dental crown firing.
  • The rated power is only 2kW, which is suitable for any small lab.
  • High speed temperature increasing, 0-40℃/min.
  • Inch HD touch screen, easy to operate, can store 30 different processes, programs.
  • 5pcs Mosi2 is heated in a ring shape, higher furnace temperature uniformity.
  • 1 year warranty
Dental zirconia sintering furnace in heating
Dental Zirconia Sintering Furnace In Heating

Zirconia Sintering Furnace Technical Parameters

chamber sizeDia 100mm × H 100mm
Max. temperature1700℃ (<2hour)
Working temperature800℃ – 1600℃
Temperature controlling● PID automatic control via SCR (Silicon Controlled Rectifier) power control with phase angle fired, current limiting resistor.
● Touch screen panel which can store 30pcs different programs
● Built in PID Auto-Tune function with overheating & broken thermocouple broken protection.
● Over temperature protection and alarm allows for operation without attendant.
Temperature accuracy± 1℃
Temperature Uniformity± 5℃
Heating rate0 – 40℃/min
ThermocoupleB type (Pt-Rh to Pt-Rh) with 99.7% purity Alumina tube
Heating elementU type MoSi2 heating elements
Zirconia Sintering Furnace ChamberZirconia Sintering Furnace Three layers of ceramic fiber insulation materials
● First layer: 1800℃ ceramic fiber board
● Second layer: 1600℃ ceramic fiber board
● Third layer: 1260℃ ceramic fiber board
Furnace structureDouble layer steel casing with dual cooling fan, surface temperature below 60℃
Furnace door● Elevator opening with platform
● Power cutting off when furnace door open
Outer dimensionAbout 550X420X810mm
Working voltage220V, 50HZ/60HZ, 1 phases (As per your order)
Rated power2KW
WeightNet Weight: about 90kgs
Gross Weight: about 110kgs
Warranty● One year limited warranty with lifetime support. (Consumable parts such as heating elements and crucibles are not covered by the warranty, please order the replacement at related products)
● ATTENTION: Any damages caused by the use of corrosive and acidic gases are not under the coverage of One Year Limited Warranty.

Application Notes

  • Cooling rate of this dental zirconia sintering furnace shall also not exceed 10 °C /min.
  • Toxic or explosive gases are not recommended for use with this furnace without necessary safetycontrols and supervision.
  • Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating.
  • Refractory door block must be inserted before closing door.

Optional Spares